Car Steering Trainer
Product Code : EL-AELE-10719
Car Steering Trainer (code EL-AELE-10719) is a real component trainer that gives the instructor a working light vehicle steering and suspension system for group or whole-class demonstration. Front wheel assemblies, MacPherson strut and coil spring assemblies, road wheels and a power steering rack are set out on a moveable steel frame so that each part can be identified, and a 1.5 kW steering motor runs from an AC 220 V/50 Hz supply.
Get a quote: use the Add To Cart enquiry button below, or send your quantity and delivery location through the contact page.
Specifications
| Parameter | Detail |
|---|---|
| Use | Group or whole-class demonstration of a working light vehicle steering and suspension system |
| Frame | Moveable steel frame (mobile stand), with each component presented for clear identification |
| System components | Front wheel assemblies, MacPherson strut and coil spring assemblies, road wheels and power steering rack |
| Listed parts | Front suspension, pressure gauge, steering wheel, power steering pump, wheel, steering motor, mobile stand |
| Motor power | 1.5 kW |
| Power supply | AC 220 V / 50 Hz |
| Dimensions | Approx. 2000 × 1100 × 1300 mm (L × W × H) |
| Weight | Approx. 130 kg |
| Training tasks | |
| Introduction | Introduction to the steering and suspension system |
| Steering gear | Disassemble, inspect and reassemble rack and pinion steering gear |
| Fluid leakage | Diagnose power steering fluid leakage |
| Inner track rod ends | Inspect and replace inner track rod ends and gaiters on manual or power rack and pinion steering gear |
| Fluid checks | Inspect power steering fluid level and condition |
| Track rods | Inspect, replace and adjust track rod ends, track rod sleeves and clamps |
| Dampers | Inspect, remove and replace dampers |
| Steering pump | Remove, inspect and replace power steering pump, mounts, seals, pump belt and pump pulley |
| Wishbones | Remove, inspect and install upper and lower wishbones, bushes, shafts and rebound bumpers |
| Hub carriers | Remove, inspect and install hub carrier assemblies |
| Supply | |
| Product code | EL-AELE-10719 |
| Manufacturer | Engineering Lab Equipment, Ambala, Haryana, India |
What Is the Car Steering Trainer Used For?
A working steering and suspension assembly lets a class see how the parts act together before anyone handles them. With the 1.5 kW steering motor running, the instructor turns the steering wheel so the group can watch the power steering rack move the front wheel assemblies and read the pressure gauge. Students then work through the listed tasks: stripping and rebuilding the rack and pinion gear, checking fluid level, condition and leaks, replacing track rod ends, gaiters and dampers, and removing and refitting the pump, wishbones and hub carriers on the moveable frame.
What to Specify When Ordering
- Quantity — the number of steering trainers wanted.
Frequently Asked Questions
Which components are mounted on the frame?
The trainer carries front wheel assemblies, MacPherson strut and coil spring assemblies, road wheels, a power steering rack and pump, a steering wheel, a steering motor and a pressure gauge on a mobile stand.
What practical tasks does it support?
Students can strip and rebuild rack and pinion steering gear, diagnose fluid leaks, check fluid level and condition, renew track rod ends, gaiters and dampers, and remove and refit the pump, wishbones and hub carriers.
What are the motor rating and power supply?
The steering motor is rated at 1.5 kW, and the trainer runs on an AC 220 V, 50 Hz supply.
Can the trainer be moved around the workshop?
Yes, the components are presented on a moveable steel frame. It measures approx. 2000 × 1100 × 1300 mm and weighs about 130 kg.
Does it cover manual as well as power steering gear?
The task list includes inspecting and replacing the inner track rod ends and gaiters on both manual and power rack and pinion steering gear, alongside the power steering pump work.
OEM Manufacturer
The Car Steering Trainer is made by Engineering Lab Equipment (Engineering Labs Equipment Pvt Ltd) at its works at Plot No. 43, Industrial Park, Sector 2, Growth Center, Saha, District Ambala, Haryana, India. The company designs, makes and tests automobile engineering cut-section models, working models and trainers for engineering colleges, polytechnics, technical training institutes and research laboratories in India and overseas, and can build equipment to an institution's own requirements. Tender and OEM enquiries are handled through the Tenders/OEM page.
Related Automobile Engineering Equipment
- Working Model of Power Steering with Suspension — electrical rack and pinion steering on a car front axle with McPherson struts, CAN body computer and displays.
- Working Model of Suspension & Steering Trainer — non-powered MacPherson strut and rack and pinion alignment trainer with turntables and magnetic gauge.
- Cut Model of Common Rack And Pinion Steering — hand-cranked sectioned hydraulic rack and pinion steering box with pump, oil tank and pipes.
- Section Vehicle Chassis Trainer — welded square-tube car chassis on steel wheels with driver's seat and adjustable axle alignment settings.
See the full Automobile Engineering Lab Equipment range or all Mechanical Engineering Lab Equipment.
Request a Quote
For this and other automobile engineering lab equipment, schools and colleges can contact Engineering Lab Equipment, a manufacturer, supplier and exporter based in Ambala, India. To ask for a quotation, send the number of steering trainers you need and your delivery location through the contact page, or use the Add To Cart enquiry button on this page.
Last updated: October 2026
