ABS Braking System Training Board Simulator
Product Code : EL-AELE-10716
ABS Braking System Training Board Simulator (code EL-AELE-10716) is a training board on which students learn the layout of an ABS control system, study its parts and carry out measurements, tests and diagnostic procedures. A working electronic ABS built from actual automobile components is mounted in a mobile aluminium frame, with a cross diagonal hydraulic circuit, front and rear discs with calipers, pressure gauges for each wheel and diagnosis through a 16-pin OBD connector, and the board measures approx. 1360 × 550 × 1800 mm.
Get a quote: use the Add To Cart enquiry button below, or send your quantity and delivery location through the contact page.
Specifications
| Parameter | Detail |
|---|---|
| Use | Learning the structure of the ABS control system, studying its components and carrying out measurements, tests and diagnostic procedures |
| Construction | Fully functional electronic ABS braking system based on actual automobile components, installed in a mobile aluminium frame |
| Visibility | Braking system and its components clearly visible |
| Hydraulic system | Original hydraulic brake system; cross diagonal circuit with front and rear discs with calipers |
| Brake display | Brake pads of the brake drums used instead of the brake discs, to show when the pressure rises and the braking moment starts |
| Operating modes | Different operation modes of the braking system shown on the stand; operation of the hydraulic circuit shown in pictures |
| Wiring diagram | Electric wiring diagram with built-in banana plug jumpers for measurements and simulation of system fault codes |
| Pressure monitoring | Installed pressure gauges for the main brake circuit and the individual pressure at each wheel |
| Simulation | Driving mode simulation |
| Functional systems | Electronic ABS system, brake booster and parking brake |
| Diagnostic connector | OBD 16-pin diagnostic connector |
| Diagnostic functions | On-board diagnostics; ECU identification; reading and erasing fault codes; display of operating system parameters (live data); activating the actuators, depending on the control unit |
| Training use | Mechanical service and repair training on the brake rig; visual aid for students of mechanical subjects |
| Power source | 12 V battery or 220/12 V power supply unit |
| Test equipment | Automotive oscilloscope; OBD diagnostic scan tool |
| Dimensions | Approx. 1360 × 550 × 1800 mm (L × W × H) |
| Weight | Approx. 60 kg |
| Product code | EL-AELE-10716 |
| Manufacturer | Engineering Lab Equipment, Ambala, Haryana, India |
What Is the ABS Braking System Training Board Simulator Used For?
An anti-lock braking system keeps the wheels from locking during hard braking by reducing and then reapplying the brake pressure at any wheel that starts to skid, so that the driver keeps steering control. On this board the instructor runs the system through its operating modes while students watch the gauges for the main circuit and each wheel, take readings at the banana plug jumpers with the automotive oscilloscope and plug the OBD scan tool into the 16-pin connector. They identify the ECU, read and erase fault codes, view live data and activate actuators, building the diagnostic routine used in brake service and repair work.
What to Specify When Ordering
- Quantity — the number of ABS training boards required.
- Power source — whether the board is to run from a 12 V battery or from the 220/12 V power supply unit.
Frequently Asked Questions
Which diagnostic tasks can students practise on this board?
Through the 16-pin OBD connector they can identify the electronic control unit, read and erase fault codes, display live operating data and activate the actuators, the last depending on the control unit fitted.
How is brake pressure shown during a demonstration?
Pressure gauges fitted to the board show the pressure in the main brake circuit and the individual pressure at each wheel, so students can follow how the pressure changes in each operating mode.
Can system faults be simulated?
Yes. The electric wiring diagram on the board carries built-in banana plug jumpers, which are used both for taking measurements and for simulating the fault codes of the system.
What brake hardware is fitted to the frame?
The original hydraulic brake system has a cross diagonal layout with front and rear discs and calipers, a working parking brake, a brake booster and the electronic ABS unit, all in a mobile aluminium frame.
What power source and test equipment go with it?
The board runs from a 12 V battery or a 220/12 V power supply unit, and an automotive oscilloscope and an OBD diagnostic scan tool are listed with it for measurements and diagnosis.
How large is the training board?
It measures approximately 1360 × 550 × 1800 mm (length × width × height) and weighs about 60 kg.
OEM Manufacturer
The ABS Braking System Training Board Simulator is made by Engineering Lab Equipment (Engineering Labs Equipment Pvt Ltd) at its works at Plot No. 43, Industrial Park, Sector 2, Growth Center, Saha, District Ambala, Haryana, India. The company designs, makes and tests automobile engineering cut-section models, working models and trainers for engineering colleges, polytechnics, technical training institutes and research laboratories in India and overseas, and can build equipment to an institution's own requirements. Tender and OEM enquiries are handled through the Tenders/OEM page.
Related Automobile Engineering Equipment
- Air Bag Trainer — training panel for SRS air bag work with light-simulated deployment, 10-fault lockable box and breakout test points.
- Alternator Trainer — externally regulated charging system demonstrator with 120 V AC motor drive, voltmeter, ammeter and test points.
- Car Steering Trainer — moveable steel-frame light vehicle steering and suspension rig with power steering rack and 1.5 kW motor.
- Cut Model of Automatic Transmission System — sectioned car automatic transmission with hydraulic torque converter, 5 forward speeds plus reverse and hand crank.
See the full Automobile Engineering Lab Equipment range or all Mechanical Engineering Lab Equipment.
Request a Quote
For this and other automobile engineering lab equipment, schools and colleges can contact Engineering Lab Equipment, a manufacturer, supplier and exporter based in Ambala, India. To ask for a quotation, send the number of ABS training boards and whether a 12 V battery or the 220/12 V power supply unit is wanted and your delivery location through the contact page, or use the Add To Cart enquiry button on this page.
Last updated: October 2026
