Lighting Training Board Simulator
Product Code : EL-AELE-10733
Lighting Training Board Simulator (code EL-AELE-10733) is a teaching board for the lighting system of a vehicle, used to show its structure and components and to practise measurements, tests and diagnostic procedures on it. The fully functional lighting system sits in a mobile aluminium frame with motor-adjusted beam levels on the front headlights, a wiring diagram with built-in banana plug jumpers, ECU identification and OBD 16-pin diagnosis, and it runs from a 12 V battery and 220/12 V power supply unit.
Get a quote: use the Add To Cart enquiry button below, or send your quantity and delivery location through the contact page.
Specifications
| Parameter | Detail |
|---|---|
| Use | Learning the structure of the lighting system, studying its components and carrying out measurements, tests and diagnostic procedures |
| Construction | Fully functional lighting training system installed in a mobile aluminium frame |
| Headlights | Adjustable beam levels with the motors of the front headlights |
| Wiring diagram | Wiring diagram on the board, fitted with banana plug jumpers for measuring and for connecting or disconnecting components |
| Signal measurement | Electrical signal parameters of system components can be measured |
| Diagnosis | Control unit diagnosis through OBD 16-pin diagnostic connector; ECU identification |
| Fault codes | Reading and erasing fault codes |
| Live data | Display of operating system parameters |
| Actuator test | Activating the actuators (depends on the control unit) |
| Headlight adjustment | Adjustment training with the headlight tester (optional) |
| Power source | 12 V battery; 220/12 V power supply unit |
| Test equipment | Automotive oscilloscope |
| Dimensions | Approx. 1800 × 1400 × 500 mm (L × W × H) |
| Weight | Approx. 80 kg |
| Product code | EL-AELE-10733 |
| Manufacturer | Engineering Lab Equipment, Ambala, Haryana, India |
What Is the Lighting Training Board Simulator Used For?
Vehicle lighting is often switched and monitored by a control unit rather than wired straight to the switches, so faults are found with diagnostic equipment as well as by checking the wiring. On this board, students trace the circuits on the wiring diagram, use the banana plug jumpers to connect or disconnect components and take signal readings with the automotive oscilloscope. Using the OBD connector, the class then checks the ECU identity, reads and clears stored codes, follows live data and triggers the actuators, and with the optional headlight tester they practise adjusting the beam levels set by the front headlight motors.
What to Specify When Ordering
- Quantity — the number of lighting training boards required.
- Headlight tester — whether the optional headlight tester is wanted for beam adjustment training.
Frequently Asked Questions
Can the headlight beam be adjusted on the board?
Yes, the front headlights have motors for adjusting the beam levels, and adjustment training is possible with the headlight tester, which is optional.
What diagnostic functions are available?
Through the OBD 16-pin connector the board allows control unit diagnosis and ECU identification, reading and erasing of fault codes, display of live data and activation of the actuators, depending on the control unit.
How are measurements taken on the circuits?
Built-in banana plug jumpers on the wiring diagram are used for measuring and for connecting or disconnecting components, and signal parameters can be viewed on the automotive oscilloscope.
How is the board powered?
The specification gives a 12 V battery and a 220/12 V power supply unit for running the lighting system on the board.
What are the board's dimensions?
The board is about 1800 mm long, 1400 mm wide and 500 mm high on its mobile aluminium frame, and it weighs around 80 kg.
OEM Manufacturer
Buyers of the Lighting Training Board Simulator deal directly with its maker, Engineering Lab Equipment (Engineering Labs Equipment Pvt Ltd), whose works are at Plot No. 43, Industrial Park, Sector 2, Growth Center, Saha, District Ambala, Haryana, India. The company designs, makes and tests automobile engineering cut-section models, working models and trainers, supplies engineering colleges, polytechnics, technical training institutes and research laboratories in India and overseas, and builds to institution-specific requirements on request. Tender details are on the Tenders/OEM page.
Related Automobile Engineering Equipment
- Power Door Lock System Trainer — plastic-board central locking trainer with 2 OEM actuators, relay, 4-fault box and 21 jumper leads.
- Power Window System Trainer — four-door electric window rig with 4 OEM motors, master and slave switches and a 4-fault box.
- Air Bag Trainer — training panel for SRS air bag work with light-simulated deployment, 10-fault lockable box and breakout test points.
- Working Model of ABS Braking System — castored 4-channel ABS rig with disc and drum brakes, per-wheel gauges, breakout box and 6-fault box.
See the full Automobile Engineering Lab Equipment range or all Mechanical Engineering Lab Equipment.
Request a Quote
For this and other automobile engineering lab equipment, schools and colleges can contact Engineering Lab Equipment, a manufacturer, supplier and exporter based in Ambala, India. Quotations are given on request: send the number of lighting boards and whether the optional headlight tester is required and your delivery location through the contact page, or add the Lighting Training Board Simulator to the enquiry cart from this page.
Last updated: October 2026
