Working Model of Gear Box with Clutch
Product Code : EL-AELE-10744
Working Model of Gear Box with Clutch (code EL-AELE-10744) is a sectioned teaching model of a manual gearbox and its clutch, installed in a mobile frame, showing how a gearbox gives a choice of gears for starting off, climbing hills and cruising on level roads. Drive passes from the input shaft through the lay shaft to the main shaft gears, which the synchromesh locks to the shaft, and the dry single-plate clutch with spring and diaphragm is worked by a foot pedal.
Get a quote: use the Add To Cart enquiry button below, or send your quantity and delivery location through the contact page.
Specifications
| Parameter | Detail |
|---|---|
| Use | Classroom demonstration of a gearbox with clutch |
| Construction | Fully functional gearbox with clutch system installed in a mobile solid frame |
| Sectioning | Various parts cross-sectioned to show internal operation; parts and cross-sections in different colours |
| Gear train | Input shaft drives the lay shaft; lay shaft turns the main shaft gears, which rotate freely until locked by the synchromesh device splined to the shaft |
| Clutch | Dry single-plate clutch with spring and diaphragm |
| Clutch operation | Mechanical, by foot pedal |
| Operation | Manual |
| Layout | On base with wheel |
| Finish | Many parts chromium plated and galvanised |
| Dimensions | Approx. 900 × 600 × 600 mm (L × W × H) |
| Weight | Approx. 55 kg |
| Product code | EL-AELE-10744 |
| Manufacturer | Engineering Lab Equipment, Ambala, Haryana, India |
What Is the Working Model of Gear Box with Clutch Used For?
A gearbox lets the engine stay in its useful speed range while road speed changes: the lower the gear, the more slowly the wheels turn for a given engine speed, which gives the extra pull needed for a standing start or a hill. With the foot pedal pressed, the dry clutch disconnects the gearbox from its drive, and students can then select a gear and watch the synchromesh lock the chosen main shaft gear to its shaft. Turning the input by hand, the class follows the drive from the input shaft through the lay shaft to the output, gear by gear.
What to Specify When Ordering
- Quantity — the number of gearbox and clutch models wanted.
Frequently Asked Questions
What type of clutch is fitted?
A dry single-plate clutch with spring and diaphragm, operated mechanically by a foot pedal so the clutch action can be shown during training.
How does drive pass through the gearbox?
The input shaft drives the lay shaft, which turns the gears on the main shaft; those gears rotate freely until the synchromesh device splined to the shaft locks one of them.
Why does a vehicle need several gears?
Different driving conditions need different ratios: a standing start or a hill climb calls for a low gear, in which the wheels turn more slowly relative to engine speed, while level cruising uses a higher gear.
Is the model mobile?
Yes, the gearbox and clutch system is installed in a mobile solid frame on a base with wheels, about 900 × 600 × 600 mm and 55 kg.
How are the internal parts shown?
Cross-sections through various parts expose the internal operation, colour separates each part, and chromium plating and galvanising are used on many components.
OEM Manufacturer
Engineering Lab Equipment (Engineering Labs Equipment Pvt Ltd) builds the Working Model of Gear Box with Clutch at its works in Saha, District Ambala, Haryana (Plot No. 43, Industrial Park, Sector 2, Growth Center). Its automobile engineering cut-section models, working models and trainers go to engineering colleges, polytechnics, technical training institutes and research laboratories in India and abroad, and equipment can be made to an institution's own requirements. For tenders and OEM supply, see the Tenders/OEM page.
Related Automobile Engineering Equipment
- Working Model of Gear Box — colour-coded 4 forward speed gearbox cutaway with diaphragm clutch and turbocharged 4 cylinder engine.
- Vehicle Transmission 5 Speed Manual Gearbox — cutaway 4WD transmission with 5 speeds and reverse, 2-speed reduction gear and self-locking hypoid differentials.
- Cut Model of Automatic Transmission System — sectioned car automatic transmission with hydraulic torque converter, 5 forward speeds plus reverse and hand crank.
- Cut Model of Planetary Gear System — hand-turned planetary gear cutaway on a carrying base plate, with drawings and technical description.
See the full Automobile Engineering Lab Equipment range or all Mechanical Engineering Lab Equipment.
Request a Quote
For this and other automobile engineering lab equipment, schools and colleges can contact Engineering Lab Equipment, a manufacturer, supplier and exporter based in Ambala, India. For a price, send the number of gearbox and clutch models you require and the delivery location through the contact page; the Add To Cart button on this page also adds the Working Model of Gear Box with Clutch to an enquiry.
Last updated: October 2026
