Bulk Density Apparatus Construction/Housing

Product Code : EL-LEAA-11008

Bulk Density Apparatus Construction/Housing (code EL-LEAA-11008) is a motor-driven apparatus used for bulk density testing, with a 150 ml cylinder held in an aluminium basket collar that takes 2 cylinders. It has a painted or powder coated mild steel body, a 1/10 HP, 1440 RPM variable motor, a mechanical timer, a digital bulk density readout and a 999 count digital counter, and is wired for 220/230 V single phase AC at 50 Hz.

Get a quote: use the Add To Cart enquiry button below, or send your quantity and delivery location through the contact page.

Specifications

What Is the Bulk Density Apparatus Construction/Housing Used For?

Bulk density is the mass of a powder or granular material divided by the volume it occupies, including the spaces between particles, and it changes as the material settles, so laboratories often measure the volume both as poured and after repeated tapping. The operator weighs the sample into the 150 ml cylinder and notes the starting volume, then runs the motor so that the cylinder is tapped repeatedly while the counter records the strokes and the timer controls the run; the settled volume gives the density after tapping. With the collar holding 2 cylinders, two samples can be run together.

What to Specify When Ordering

• Quantity — the number of apparatus required.

Frequently Asked Questions

What cylinder does the apparatus use?
It uses a 150 ml cylinder, held in an aluminium basket collar that takes 2 cylinders at a time.

What does the control panel include?
The control panel has a mains switch, motor switch, fuse, 999 count digital counter, panel reset switch and starter.

What motor drives the apparatus?
A 1/10 HP motor running at 1440 RPM, listed as variable, drives the apparatus from a 220/230 V single phase mains line at 50 Hz.

What is the difference between bulk and tapped density?
Bulk density is measured on the powder as poured, while tapped density is measured after the cylinder has been tapped so the particles pack more closely; comparing the two shows how a powder settles.

How are the results read?
The apparatus has a mechanical timer for the bulk density run and a digital bulk density readout, alongside the digital counter on the control panel.

OEM Manufacturer

Engineering Lab Equipment (Engineering Labs Equipment Pvt Ltd) builds the Bulk Density Apparatus Construction/Housing at its works in Saha, District Ambala, Haryana (Plot No. 43, Industrial Park, Sector 2, Growth Center). Its general laboratory equipment and accessories such as ovens, baths, balances and measuring tools go to engineering colleges, polytechnics, technical training institutes and research laboratories in India and abroad, and equipment can be made to an institution's own requirements. For tenders and OEM supply, see the Tenders/OEM page.

Related Laboratory Equipment and Accessories

• Friability Test Apparatus — acrylic drum tablet friability tester, single or double drum, with revolution counter and 0 to 60 minute timer.
• Tablet Hardness Tester — digital tablet breaking force tester for up to 25 tablets, 1 to 300 N measuring range.
• Laboratory Ball Mill — ball mill with FHP motor and removable aluminium jar for 1 to 2 kg batches.

See the full Laboratory Equipment and Accessories range or all Civil Engineering Lab Equipment.

Request a Quote

For this and other laboratory equipment and accessories, schools and colleges can contact Engineering Lab Equipment, a manufacturer, supplier and exporter based in Ambala, India. For a price, send the number of apparatus required and the delivery location through the contact page; the Add To Cart button on this page also adds the Bulk Density Apparatus Construction/Housing to an enquiry.

Last updated: October 2026