Kjeldahl Digestion Unit
Product Code : EL-ETLE-10975
Kjeldahl Digestion Unit (code EL-ETLE-10975) is a metal type digestion unit used for estimating the nitrogen content of samples, built as a 6-test unit with a lead fume duct and a pair of hangers. The housing is mild steel sheet with powder coating, and the unit is supplied complete in all respects apart from glass parts and clamps, which do not form part of the supply.
Get a quote: use the Add To Cart enquiry button below, or send your quantity and delivery location through the contact page.
Specifications
| Parameter | Detail |
|---|---|
| Use | Estimation of nitrogen content in samples |
| Type | Metal type |
| Capacity | 6 tests |
| Housing | Mild steel sheet, powder coated |
| Fume duct | Lead |
| Hangers | One pair |
| Supply | Complete in all respects, without glass parts and clamps |
| Product code | EL-ETLE-10975 |
| Manufacturer | Engineering Lab Equipment, Ambala, Haryana, India |
What Is the Kjeldahl Digestion Unit Used For?
In the Kjeldahl method, organic nitrogen in a sample such as sludge, soil, feed or food is converted to ammonium salts by boiling it with concentrated sulphuric acid, after which the ammonia is distilled off and titrated to calculate the nitrogen or protein content. This unit carries out the digestion stage for 6 samples at a time: the operator sets the digestion flasks in the unit and heats them until the digest clears, while the lead fume duct draws away the acid fumes. The glass parts and clamps are not part of the supply.
What to Specify When Ordering
- Quantity — the number of digestion units required.
Frequently Asked Questions
What is the Kjeldahl Digestion Unit used for?
It is used for the digestion stage of nitrogen estimation, in which samples are boiled with acid so that their nitrogen can afterwards be distilled and measured.
How many samples does it take?
It is a 6-test unit, so up to 6 samples can be digested together, with a lead fume duct to carry the acid fumes away.
Are glass parts included?
No. The metal unit is supplied without glass parts and clamps; apart from these it is supplied complete in all respects.
What is the housing made of?
The housing is made of mild steel sheet and is powder coated, and the unit comes with a lead fume duct and a pair of hangers.
How can a quotation for this unit be requested?
Use this page's Add To Cart enquiry button, or send the required quantity and the delivery location through the contact page.
OEM Manufacturer
Engineering Lab Equipment (Engineering Labs Equipment Pvt Ltd) builds the Kjeldahl Digestion Unit at its works in Saha, District Ambala, Haryana (Plot No. 43, Industrial Park, Sector 2, Growth Center). Its environmental testing instruments for water, soil and air analysis go to engineering colleges, polytechnics, technical training institutes and research laboratories in India and abroad, and equipment can be made to an institution's own requirements. For tenders and OEM supply, see the Tenders/OEM page.
Related Environmental Testing Equipment
- COD Digestion Apparatus — 15-tube aluminium block heater to 180 °C with digital controller and 120 minute alarm timer.
- Digital Spectrophotometer — 340 to 960 nm LED-readout spectrophotometer with halogen lamp and silicon photodiode detector.
- BOD Incubator — refrigerated and heated 5 to 50°C incubator for BOD tests with stainless steel interior and PID control.
See the full Environmental Testing Lab Equipment range or all Civil Engineering Lab Equipment.
Request a Quote
For this and other environmental testing lab equipment, schools and colleges can contact Engineering Lab Equipment, a manufacturer, supplier and exporter based in Ambala, India. For a price, send the number of digestion units required and the delivery location through the contact page; the Add To Cart button on this page also adds the Kjeldahl Digestion Unit to an enquiry.
Last updated: October 2026
