Stripping Value Apparatus
Product Code : EL-BTLE-10437
Stripping Value Apparatus (code EL-BTLE-10437) is a motor-driven rotating tray used for stripping value tests, carrying 4 bottles of about 400 cc each, set 90° apart with their mouths facing inward. A geared electric motor spins the tray in a vertical plane at roughly 100 R.P.M. for the period set on the time switch, drawing power from a 230 V A.C. single phase supply.
Get a quote: use the Add To Cart enquiry button below, or send your quantity and delivery location through the contact page.
Specifications
| Parameter | Detail |
|---|---|
| Use | Stripping value testing |
| Tray | Circular, rotating in a vertical plane |
| Speed | Approximately 100 R.P.M. |
| Drive | Electrical geared motor |
| Bottles | 4, approximately 400 cc each, mounted at 90° to each other with mouths towards the centre of the tray |
| Timer | Time switch |
| Power supply | 230 V A.C., single phase |
| Product code | EL-BTLE-10437 |
| Manufacturer | Engineering Lab Equipment, Ambala, Haryana, India |
What Is the Stripping Value Apparatus Used For?
The stripping value test shows how well a bitumen film stays bonded to aggregate when water is present, since water displacing the binder from the stone is a common cause of early pavement distress. Bitumen-coated aggregate is placed with water in the bottles, the bottles are fixed to the tray and the time switch is set, and the tray then tumbles the contents end over end. When the run ends the aggregate is examined and the proportion of surface left uncoated is estimated, giving the stripping value.
What to Specify When Ordering
- Quantity — the number of apparatus required.
Frequently Asked Questions
How many samples does the Stripping Value Apparatus take?
Four bottles of approximately 400 cc each are mounted on the circular tray, set at 90° to one another with their mouths pointing to the centre.
How fast does the tray rotate?
The geared motor drives the tray round in a vertical plane at about 100 R.P.M., for the length of time set on the time switch.
What does the stripping value tell the engineer?
It indicates how far water displaces bitumen from coated aggregate, which helps in judging whether a binder and aggregate combination will resist stripping in service.
What electrical supply is required?
It runs on a 230 V A.C. single phase supply, powering the geared motor that rotates the tray of bottles.
How can this apparatus be ordered?
Send an enquiry with the Add To Cart button on this page, or enter the quantity and where it should be delivered on the contact page.
OEM Manufacturer
The Stripping Value Apparatus is made by Engineering Lab Equipment (Engineering Labs Equipment Pvt Ltd) at its works at Plot No. 43, Industrial Park, Sector 2, Growth Center, Saha, District Ambala, Haryana, India. The company designs, makes and tests bitumen and asphalt testing equipment for binder tests, mix preparation and specimen testing for engineering colleges, polytechnics, technical training institutes and research laboratories in India and overseas, and can build equipment to an institution's own requirements. Tender and OEM enquiries are handled through the Tenders/OEM page.
Related Bitumen and Asphalt Testing Equipment
- Asphalt Content Tester — ignition furnace for HMA binder content, taking samples up to 4000 gms, with 10 Kg balance.
- Automatic Marshall Stability Test Machine — 50 kN bench Marshall stability and flow tester with touchscreen control and 6-60 mm/min platen speed.
- Mastic Asphalt Tester — lever-loaded 6.5 mm pin hardness tester for flooring mastic asphalt, with 35 °C water bath.
- Cut Back Bitumen Distillation Equipment — shielded hot-plate distillation set with 500 ml flask and 100 ml crow receiver for cutback bitumen.
See the full Bitumen/Asphalt Testing Lab Equipment range or all Civil Engineering Lab Equipment.
Request a Quote
For this and other bitumen and asphalt testing lab equipment, schools and colleges can contact Engineering Lab Equipment, a manufacturer, supplier and exporter based in Ambala, India. To ask for a quotation, send the number of stripping value machines required and your delivery location through the contact page, or use the Add To Cart enquiry button on this page.
Last updated: October 2026
