Dust Chip Remover

Product Code : EL-WTMAA-10595

Dust Chip Remover (code EL-WTMAA-10595) is a conveyor-fed machine that removes dust and chips from workpieces using double nylon brushes with a suction fan. It has a working width of 1300 mm, takes workpieces of at least 350 mm length and 30-50 mm thickness on a 5100 mm conveyor belt at up to 23 m/min, and has a total motor power of 4 kW.

Get a quote: use the Add To Cart enquiry button below, or send your quantity and delivery location through the contact page.

Specifications

What Is the Dust Chip Remover Used For?

Dust and loose chips left on workpiece surfaces after machining or sanding interfere with later finishing, gluing or coating, so they are cleared before the next operation. The operator places workpieces of at least 350 mm length and 30-50 mm thickness on the conveyor, which carries them at up to 23 m/min under the double nylon brushes; the brushes sweep the surface while the suction fan and the four blow dust motors carry the dust away. Work up to the 1300 mm working width can be passed through, and it is loaded at a working height of 900 mm.

What to Specify When Ordering

• Quantity — the number of dust and chip removers required.

Frequently Asked Questions

What size of workpiece can be cleaned?
Workpieces up to the 1300 mm working width, with a minimum length of 350 mm and a thickness of 30-50 mm, can be passed through the machine.

How fast does the conveyor feed?
The feeding speed is up to 23 m/min, with a 1.5 kW feeding motor driving the 5100 mm conveyor belt.

How does it remove dust and chips?
Double nylon brushes, driven by a 1.5 kW brush motor, sweep the workpiece while a suction fan and four 0.25 kW blow dust motors clear away the loosened dust and chips.

What is the total power requirement?
Total motor power is 4 kW, made up of the 1.5 kW feeding motor, the 1.5 kW brush motor and four 0.25 kW blow dust motors.

At what height is the work fed?
The working height is 900 ±20 mm, which is the level at which workpieces are placed onto the conveyor for cleaning.

OEM Manufacturer

Buyers of the Dust Chip Remover deal directly with its maker, Engineering Lab Equipment (Engineering Labs Equipment Pvt Ltd), whose works are at Plot No. 43, Industrial Park, Sector 2, Growth Center, Saha, District Ambala, Haryana, India. The company designs, makes and tests workshop machines, tools and accessories for engineering training workshops, supplies engineering colleges, polytechnics, technical training institutes and research laboratories in India and overseas, and builds to institution-specific requirements on request. Tender details are on the Tenders/OEM page.

Related Workshop Tools and Machines

• Wood Working Basic Router — hand-held wood router with 1-3/4 HP, 11-amp motor and 1/64-inch micro-fine depth ring.
• Wood Working Drum Sander — conveyor drum sander for panels up to 50 inch wide in two passes with variable feed.
• Wood Working Table Saw Motor Driven — cabinet table saw with 10 inch blade, 3 HP single phase motor and cast iron extension wings.

See the full Workshop Tools, Machines and Accessories range or all Mechanical Engineering Lab Equipment.

Request a Quote

For this and other workshop tools, machines and accessories, schools and colleges can contact Engineering Lab Equipment, a manufacturer, supplier and exporter based in Ambala, India. Quotations are given on request: send the number of machines required and your delivery location through the contact page, or add the Dust Chip Remover to the enquiry cart from this page.

Last updated: October 2026