Marsh Funnel with Measuring Cup

Product Code : EL-CTLE-10911

Marsh Funnel with Measuring Cup (code EL-CTLE-10911) is a flow-time apparatus used to measure the viscosity of slurry and other cement mixes. Its metallic funnel is 12 inches long and 6 inches wide at the top and is mounted on a vertical stand; the cone tapers to a polymer plastic drain tube at the lower end, the tube is 2 inches long with a 3/16 inch diameter, and the closed cone holds 1500 cc.

Get a quote: use the Add To Cart enquiry button below, or send your quantity and delivery location through the contact page.

Specifications

What Is the Marsh Funnel with Measuring Cup Used For?

Marsh funnel viscosity is a flow-time measure: the funnel is filled with slurry and the number of seconds the slurry takes to drain into the measuring cup is recorded, with thicker mixes taking longer. The operator closes the outlet, pours the freshly mixed slurry into the funnel on its vertical stand, then opens the outlet and times the flow into the cup. Because flow speed and thickness affect how a cement slurry behaves and its strength characteristics, the reading is used to compare mixes and keep their consistency in check from batch to batch.

What to Specify When Ordering

• Quantity — the number of Marsh funnel sets required.

Frequently Asked Questions

What does the Marsh funnel measure?
It measures the viscosity of slurry and other cement mixes as a flow time; viscosity governs the flow speed and thickness of the slurry and so affects its strength characteristics.

What are the funnel dimensions?
The metallic funnel is 12 inches long and 6 inches wide at the top, and it tapers down to a tube 2 inches long with a 3/16 inch diameter.

How much slurry does the funnel hold?
The total capacity of the closed cone is 1500 cc, which is the volume of slurry the funnel takes before the outlet is opened for timing.

What is the drain tube made of?
The cone connects at its lower end with a drain tube made of polymer plastic, while the funnel itself is metallic and is mounted on a vertical stand.

How is a reading taken?
The funnel is filled with the outlet closed, the outlet is opened, and the time taken for the slurry to run out into the measuring cup is noted; a longer time indicates a thicker mix.

OEM Manufacturer

The Marsh Funnel with Measuring Cup is made by Engineering Lab Equipment (Engineering Labs Equipment Pvt Ltd) at its works at Plot No. 43, Industrial Park, Sector 2, Growth Center, Saha, District Ambala, Haryana, India. The company designs, makes and tests cement testing equipment such as Vicat and Blaine apparatus, moulds, mixers and curing equipment for engineering colleges, polytechnics, technical training institutes and research laboratories in India and overseas, and can build equipment to an institution's own requirements. Tender and OEM enquiries are handled through the Tenders/OEM page.

Related Cement Testing Equipment

• Flow Cone Apparatus — stainless steel flow cone on stand with 1.5 mm sieve, 10 mm nozzle and 1 litre cup.
• Reactivity Test Apparatus — quicklime reactivity set with 1000 ml Dewar vessel, stirring motor and digital or datalog thermometer.
• Cement Curing Cabinet — polypropylene humidity cabinet at 20±1 °C and 95% to saturation with four stainless steel racks.
• Length Comparator — two-column steel frame with adjustable anvil and 12.5 × 0.001 mm digital gauge for mortar specimens.
• Pat Test, Brass Ring Mould — 100 mm brass ring, 5 mm deep with 5° taper and glass plate, for lime and plaster pats.

See the full Cement Testing Lab Equipment range or all Civil Engineering Lab Equipment.

Request a Quote

For this and other cement testing lab equipment, schools and colleges can contact Engineering Lab Equipment, a manufacturer, supplier and exporter based in Ambala, India. To ask for a quotation, send the number of Marsh funnel and measuring cup sets required and your delivery location through the contact page, or use the Add To Cart enquiry button on this page.

Last updated: October 2026