Digital Vernier Caliper
Product Code : EL-LEAA-10540
Digital Vernier Caliper (code EL-LEAA-10540) is an electronic-readout caliper used to measure outside and inside diameters, depths and steps. Made of hardened stainless steel, it reads in inch or metric units selected with the Inch/Metric button, its Zero/ABS button gives readings from a set zero or from the true origin, and it is supplied in a fitted plastic case.
Get a quote: use the Add To Cart enquiry button below, or send your quantity and delivery location through the contact page.
Specifications
| Parameter | Detail |
|---|---|
| Construction | Hardened stainless steel |
| Measurements | 4 way: outer diameter, inner diameter, depth and step |
| Zero/ABS button | Displays the absolute coordinate, or true position from the origin point |
| Inch/Metric button | Switches the readout between inches and metric |
| Supplied in | Fitted plastic case |
| Product code | EL-LEAA-10540 |
| Manufacturer | Engineering Lab Equipment, Ambala, Haryana, India |
What Is the Digital Vernier Caliper Used For?
A caliper measures the size of a part between its jaws: the outside jaws close on a rod or specimen for the outer diameter, the inside jaws open within a bore for the inner diameter, the depth rod extends from the end of the beam to measure the depth of a hole, and the step faces measure the height of a shoulder. In the laboratory it is used to check specimen dimensions, mould sizes and small parts before testing. Pressing Zero at any jaw position lets differences be read directly, ABS returns the display to the true position from the origin, and the Inch/Metric button suits drawings in either unit.
What to Specify When Ordering
- Quantity — the number of calipers required.
Frequently Asked Questions
What can the caliper measure?
It gives 4 way measurement: outer diameter, inner diameter, depth and step, using the outside jaws, inside jaws, depth rod and step faces.
What does the Zero/ABS button do?
Zero sets the display to zero at any position so that differences can be read directly, and ABS displays the absolute coordinate, the true position measured from the origin point.
Can it read in both inches and millimetres?
Yes. The Inch/Metric button switches the readout between inch and metric measurement with a single press.
What is the caliper made of and how is it supplied?
The caliper is made of hardened stainless steel and is supplied in a fitted plastic case for storage and carrying.
OEM Manufacturer
Engineering Lab Equipment (Engineering Labs Equipment Pvt Ltd) builds the Digital Vernier Caliper at its works in Saha, District Ambala, Haryana (Plot No. 43, Industrial Park, Sector 2, Growth Center). Its general laboratory equipment and accessories such as ovens, baths, balances and measuring tools go to engineering colleges, polytechnics, technical training institutes and research laboratories in India and abroad, and equipment can be made to an institution's own requirements. For tenders and OEM supply, see the Tenders/OEM page.
Related Laboratory Equipment and Accessories
- Dial Gauge — steel plunger indicator reading 0.01 mm over 10 mm on a 0-100 graduated dial.
- Digital Dial Gauge — microprocessor gauge with digital readout, zero button, data output port and SR44/LR44 battery.
- Disc Type Wire Gauge — hardened and tempered steel disc for gauging plate thickness and wire diameter, sizes 1 to 36.
- Measuring Tapes — set of 2 plastic flexible rulers in sky blue and black, each 10 × 4 × 9 cm.
See the full Laboratory Equipment and Accessories range or all Civil Engineering Lab Equipment.
Request a Quote
For this and other laboratory equipment and accessories, schools and colleges can contact Engineering Lab Equipment, a manufacturer, supplier and exporter based in Ambala, India. For a price, send the number of calipers required and the delivery location through the contact page; the Add To Cart button on this page also adds the Digital Vernier Caliper to an enquiry.
Last updated: October 2026
