pH Tester
Product Code : EL-LEAA-10549
pH Tester (code EL-LEAA-10549) is a pH meter of pentagon design with a slim probe, used to measure pH in small samples. The probe is 103 mm long and tapers to an 8 mm diameter for test tubes and vials, and the tester has one or two point automatic calibration, automatic buffer recognition, calibrated buffer tags, a stability indicator, a low battery indicator and selectable automatic shut off.
Get a quote: use the Add To Cart enquiry button below, or send your quantity and delivery location through the contact page.
Specifications
| Parameter | Detail |
|---|---|
| Design | Pentagon design |
| Probe | 103 mm long, tapered to 8 mm diameter |
| Sample containers | Measurements in test tubes and vials |
| Calibration | Automatic, to one or two points |
| Buffer recognition | Automatic |
| Buffer tags | Calibrated buffer tags |
| Indicators | Stability indicator, low battery indicator |
| Shut off | Selectable automatic shut off |
| Standards | BS, IS, ASTM, AASHTO |
| Product code | EL-LEAA-10549 |
| Manufacturer | Engineering Lab Equipment, Ambala, Haryana, India |
What Is the pH Tester Used For?
pH expresses how acidic or alkaline a water sample or solution is, and it is measured on water, soil suspensions and test solutions in many laboratories. The tester is first calibrated against one or two buffer solutions, which it recognises automatically; the probe is then dipped into the sample, and the reading is taken when the stability indicator shows it has settled. The slim probe, 103 mm long and tapered to 8 mm, reaches into test tubes and vials, so only a small volume of sample is needed. Automatic shut off can be selected to save the battery.
What to Specify When Ordering
- Quantity — the number of pH testers required.
Frequently Asked Questions
Can it measure samples in test tubes?
Yes. The probe is 103 mm long and tapers to an 8 mm diameter, so it fits into test tubes and vials for measuring small samples.
How is the tester calibrated?
Calibration is automatic to one or two points, with automatic buffer recognition and calibrated buffer tags to assist the process.
How does the user know a reading is ready?
A stability indicator shows when the reading has settled, so the value can be noted without guessing whether it is still drifting.
Does it switch off automatically?
Automatic shut off is selectable, so it can be turned on to save the battery, and a low battery indicator warns when the battery needs replacing.
OEM Manufacturer
Engineering Lab Equipment (Engineering Labs Equipment Pvt Ltd) builds the pH Tester at its works in Saha, District Ambala, Haryana (Plot No. 43, Industrial Park, Sector 2, Growth Center). Its general laboratory equipment and accessories such as ovens, baths, balances and measuring tools go to engineering colleges, polytechnics, technical training institutes and research laboratories in India and abroad, and equipment can be made to an institution's own requirements. For tenders and OEM supply, see the Tenders/OEM page.
Related Laboratory Equipment and Accessories
- TDS Meter — pen type dissolved solids tester with temperature sensor, hold function and LR44 batteries in a pouch.
- pH Paper — pH test paper in books of 20 strips with a pH 2 to 10.5 colour chart.
- Filter Paper — white laboratory filter paper, 2 mm thick, in packets of 100 pieces in a blue box.
- Graduated Measuring Jars — volume-graduated jar for site silt and sand checks and liquids, 5 ml to 2000 ml.
See the full Laboratory Equipment and Accessories range or all Civil Engineering Lab Equipment.
Request a Quote
For this and other laboratory equipment and accessories, schools and colleges can contact Engineering Lab Equipment, a manufacturer, supplier and exporter based in Ambala, India. For a price, send the number of pH testers required and the delivery location through the contact page; the Add To Cart button on this page also adds the pH Tester to an enquiry.
Last updated: October 2026
