Water Bath (6 Holes)

Product Code : EL-LEAA-10519

Water Bath (6 Holes) (code EL-LEAA-10519) is a rectangular boiling water bath with six holes, used to heat vessels in water at a set temperature in the laboratory. It works from ambient +5 °C to 100 °C under a thermostatic regulator with an LED temperature display, and has a 304 stainless steel inner chamber, a powder coated GI sheet exterior, load indicators and a rear water drain nozzle.

Get a quote: use the Add To Cart enquiry button below, or send your quantity and delivery location through the contact page.

Specifications

What Is the Water Bath (6 Holes) Used For?

A water bath gives gentle, even heating because the vessels stand in water rather than over a flame or hot plate, so their contents cannot rise above the temperature of the water. Flasks, beakers or tubes are set in the six holes, the regulator is set anywhere from ambient +5 °C up to 100 °C, and the LED display shows when the water has reached temperature. At 100 °C it serves as a boiling water bath for heating and evaporating work. The load indicators show the running status, and the water is emptied through the drain nozzle at the back.

What to Specify When Ordering

• Quantity — the number of baths required.
• Number of holes — this 6 hole model, or the 4 hole or 12 hole model of the same range.

Frequently Asked Questions

What temperature range does the bath cover?
The bath runs from 5 °C above ambient up to 100 °C, the boiling point of water, with the setting held by a thermostatic regulator and shown on an LED display.

What is the bath made of?
The inner chamber is 304 stainless steel and the exterior is GI sheet with a powder coated finish; both the inner and outer surfaces resist corrosion.

Are other hole configurations made?
Yes. This model has 6 holes, and the same rectangular range is also made with 4 holes and with 12 holes.

How is the water emptied?
A water drain nozzle is fitted at the back of the bath, so the water can be run off for cleaning or before the bath is moved.

What do the load indicators show?
The load indicators show the running status of the bath, so the operator can see at a glance that it is working.

Why use a water bath instead of a hot plate?
In a water bath the vessel is surrounded by water held at the set temperature, so heating is even and the contents cannot overheat beyond the water temperature, which suits heat-sensitive samples.

OEM Manufacturer

Engineering Lab Equipment (Engineering Labs Equipment Pvt Ltd) builds the Water Bath (6 Holes) at its works in Saha, District Ambala, Haryana (Plot No. 43, Industrial Park, Sector 2, Growth Center). Its general laboratory equipment and accessories such as ovens, baths, balances and measuring tools go to engineering colleges, polytechnics, technical training institutes and research laboratories in India and abroad, and equipment can be made to an institution's own requirements. For tenders and OEM supply, see the Tenders/OEM page.

Related Laboratory Equipment and Accessories

• Universal Water Bath Serological — rectangular stainless steel bath for serological work from ambient +5 to 99 °C with AC/DC gear motor.
• High Precision Water Bath — stirred double wall water bath, 8 to 30 litre, ambient +5 to 95 °C with ±0.2 °C stability.
• Laboratory Hot Plate — 7.5 inch cast iron top laboratory hot plate heating to 300 °C with 0 to 100 regulator.
• Hot Plate Circular — compact round heater with cast iron top and powder coated M.S. body, up to 350 degrees.

See the full Laboratory Equipment and Accessories range or all Civil Engineering Lab Equipment.

Request a Quote

For this and other laboratory equipment and accessories, schools and colleges can contact Engineering Lab Equipment, a manufacturer, supplier and exporter based in Ambala, India. For a price, send the number of baths and the number of holes, 4, 6 or 12 and the delivery location through the contact page; the Add To Cart button on this page also adds the Water Bath (6 Holes) to an enquiry.

Last updated: October 2026