Cantilever Beam Apparatus
Product Code : EL-AMLE-10618
Cantilever Beam Apparatus (code EL-AMLE-10618) is an L-shaped stainless steel beam used for loading experiments on a cantilever arm, with a spring balance that brings the horizontal leg back to level under load. The graduated horizontal arm is 75 cm long and the vertical arm 20 cm, the spring balance has a 10 kg capacity with analog display, and one sliding slotted weight set from 100 gm to 1 kg is supplied.
Get a quote: use the Add To Cart enquiry button below, or send your quantity and delivery location through the contact page.
Specifications
| Parameter | Detail |
|---|---|
| Beam | L-type, stainless steel |
| Horizontal arm | 75 cm, graduated |
| Vertical arm | 20 cm |
| Spring balance | 10 kg capacity; restores the horizontal leg to the horizontal position under any load |
| Display | Analog |
| Frequency | 50 Hz |
| Weight set | One sliding slotted weight set, 100 gm to 1 kg |
| Product code | EL-AMLE-10618 |
| Manufacturer | Engineering Lab Equipment, Ambala, Haryana, India |
What Is the Cantilever Beam Apparatus Used For?
A cantilever is a beam supported at one end only, so a load placed along it produces a bending moment that grows with its distance from the support. On this apparatus the student slides the slotted weights to a chosen mark on the graduated 75 cm arm and adjusts the spring balance until the horizontal leg returns to the horizontal position; the balance reading then gives the force needed to hold the arm level. Taking readings for several loads between 100 gm and 1 kg at several positions lets the moments about the support be compared and the principle of moments checked.
What to Specify When Ordering
- Quantity — the number of cantilever beam sets required.
Frequently Asked Questions
What are the arm lengths of the beam?
The L-type stainless steel beam has a graduated horizontal arm 75 cm long and a vertical arm 20 cm long.
What does the spring balance do?
The spring balance, of 10 kg capacity with an analog display, is used to bring the horizontal leg back to the horizontal position under any applied load, and its reading is taken at that point.
Which weights come with the apparatus?
One sliding slotted weight set is supplied, ranging from 100 gm to 1 kg, so loads of different sizes can be placed at different points along the graduated arm.
What is the beam made of?
The beam is made of stainless steel and is shaped as an L, with graduations along the horizontal leg for locating the load.
What is a cantilever?
A cantilever is a beam supported at one end only. A load hung along it creates a bending moment at the support that increases with the distance of the load from that end.
OEM Manufacturer
Engineering Lab Equipment (Engineering Labs Equipment Pvt Ltd) builds the Cantilever Beam Apparatus at its works in Saha, District Ambala, Haryana (Plot No. 43, Industrial Park, Sector 2, Growth Center). Its applied mechanics apparatus for statics, friction, machines and mechanisms go to engineering colleges, polytechnics, technical training institutes and research laboratories in India and abroad, and equipment can be made to an institution's own requirements. For tenders and OEM supply, see the Tenders/OEM page.
Related Applied Mechanics Equipment
- Bending Moment Apparatus — 1 m span hinged teak wood beam for bending moment, shear force and influence line experiments.
- Youngs Modulus Apparatus — wire extension apparatus with 0.1 mm vernier scales, ceiling clamp and 1.3 kg tension weight.
- Universal Force Table — 400 mm cast aluminium force table graduated in 360 degrees with six pulleys and slotted weight sets.
See the full Applied Mechanics Lab Equipment range or all Mechanical Engineering Lab Equipment.
Request a Quote
For this and other applied mechanics lab equipment, schools and colleges can contact Engineering Lab Equipment, a manufacturer, supplier and exporter based in Ambala, India. For a price, send the number of cantilever beam sets required and the delivery location through the contact page; the Add To Cart button on this page also adds the Cantilever Beam Apparatus to an enquiry.
Last updated: October 2026
